| WTR-001 |
Treated Wastewater |
Treated wastewater meeting discharge or reclamation standards; low TSS, balanced pH. |
H₂O + trace dissolved solids |
Liquid |
28.75 TPD |
— |
| WTR-002 |
Gray Water |
Lightly treated grey-water fraction for non-potable irrigation and site re-use. |
H₂O + trace organics |
Liquid |
7.5 TPD |
— |
| CRB-001 |
Raw Carbon Char CDR |
Primary fixed-carbon intermediate from the Recyclotron™ CRB cascade; feedstock for all higher-grade carbon outputs. |
C (>75%) + ash minerals |
Solid — granular char |
15 TPD |
— |
| MTL-001 |
Iron / Steel |
Ferrous scrap from pre-separation and ash fractions; direct steelmaking feed. |
Fe > 90% + trace Mn / Cr / Ni |
Solid — mixed scrap / granule |
6.6 TPD |
— |
| MTL-002 |
Mixed Non-Ferrous |
Mixed non-ferrous metal fraction for secondary smelter input or individual-metal sorting. |
Al + Cu + Zn + Pb + Sn + Ni (mixed) |
Solid — mixed granule / shred |
3.4 TPD |
— |
| GLS-001 |
Mixed Glass Cullet |
Mixed glass cullet sorted from manufacturing feedstock; primary feedstock for all glass cascade outputs. |
SiO₂ + Na₂O + CaO + Al₂O₃ (mixed soda-lime) |
Solid — cullet |
3 TPD |
— |
| GLS-002 |
Glass Powder |
Glass powder milled to −100 mesh for construction fillers and ceramic applications. |
SiO₂-dominant glass powder |
Solid — fine powder |
2 TPD |
— |
| GAS-001 |
Mixed Gas |
Raw mixed syngas from the Recyclotron™ MCR stage; variable-composition primary gas cascade feedstock. |
CO + H₂ + CO₂ + N₂ + H₂O (variable) |
Gas (compressed) |
31 TPD |
— |
| MIN-001 |
Mineral Aggregate NEW |
Partially carbonated mineral aggregate from legacy-ash stabilisation; construction sub-base and general fill. |
CaO·SiO₂·Al₂O₃ + CaCO₃ (partial carbonation) |
Solid — aggregate |
10 TPD |
— |
| WTR-003 |
Filtered Water |
Multi-stage filtered water with low suspended solids; precursor to higher-purity grades. |
H₂O, TSS < 1 ppm |
Liquid |
2.5 TPD |
— |
| CRB-002 |
Carbon Black CDR |
Purified carbon black for rubber, ink, and coating applications. |
C > 98% |
Solid — fine powder |
6.25 TPD |
— |
| CRB-003 |
Activated Carbon CDR |
High-surface-area activated carbon for adsorption, water treatment, and gas purification. |
C, SA 600–800 m²/g |
Solid — granular / powder |
5 TPD |
— |
| CRB-004 |
Biochar CDR |
Stabilised biochar for soil amendment, compost enhancement, and carbon sequestration. |
C + H + O + trace minerals |
Solid — granular |
2.5 TPD |
— |
| CRB-005 |
Standard Graphite CDR |
Lubricant-grade graphite for mechanical and metallurgical applications. |
C (graphitic, >90%) |
Solid — flake / powder |
1.8 TPD |
— |
| MTL-003 |
Aluminum |
Sorted aluminium for secondary smelting and alloy production. |
Al > 95% |
Solid — shred / granule |
0.75 TPD |
— |
| MTL-004 |
Copper |
Recovered copper for secondary refining or direct wire-rod production. |
Cu > 92% |
Solid — granule / chunk |
0.5 TPD |
— |
| MTL-005 |
Zinc |
Sorted zinc from consumer electronics and galvanised fractions. |
Zn (sorted) |
Solid — granule |
0.25 TPD |
— |
| MTL-006 |
Lead |
Sorted lead from consumer products for battery plate and shielding markets. |
Pb (sorted) |
Solid — granule |
0.125 TPD |
— |
| MTL-007 |
Nickel |
Sorted nickel from electronics and stainless-steel fractions. |
Ni (sorted) |
Solid — granule |
0.125 TPD |
— |
| MTL-008 |
Tin |
Sorted tin from solder and tin-plated steel fractions. |
Sn (sorted) |
Solid — granule |
0.125 TPD |
— |
| MTL-009 |
Manganese |
Sorted manganese from battery and specialty-steel fractions. |
Mn (sorted) |
Solid — granule |
0.125 TPD |
— |
| MTL-045 |
Black Mass Concentrate NEW |
Pre-processed black-mass intermediate from end-of-life battery fraction; clean hydrometallurgical feed. |
Li + Co + Ni + Mn + C (mixed oxide / graphite) |
Solid — powder concentrate |
0.5 TPD |
— |
| GLS-003 |
Color-Sorted Cullet |
Optically colour-sorted glass cullet (clear, amber, green) for container-glass remelting. |
SiO₂ + Na₂O + CaO (colour-pure) |
Solid — cullet |
1.5 TPD |
— |
| GLS-004 |
Glass Aggregate |
Sized and cleaned glass aggregate for road base, drainage media, and construction fill. |
SiO₂ + mixed glass oxides |
Solid — aggregate |
1.5 TPD |
— |
| GAS-003 |
Carbon Dioxide, Industrial |
Industrial-grade CO₂ captured and compressed for process use, beverage, or permanent sequestration. |
CO₂ (industrial grade) |
Gas / supercritical |
15 TPD |
— |
| GAS-004 |
Nitrogen, Industrial |
Industrial nitrogen from integrated air separation; inert blanketing and process-gas applications. |
N₂ (industrial purity) |
Gas (compressed) |
6.25 TPD |
— |
| GAS-005 |
Oxygen, Industrial |
Industrial oxygen from integrated air separation; oxidant for downstream process stages. |
O₂ (industrial purity) |
Gas (compressed) |
6.25 TPD |
— |
| ARM-001 |
Mixed Aromatics |
Mixed aromatic hydrocarbon stream from OmniCrude™ BTX cascade; chemical feedstock blend. |
C₆–C₁₀ aromatic hydrocarbons (mixed) |
Liquid |
1.25 TPD |
— |
| ARM-002 |
BTX Mixture |
Concentrated BTX (benzene–toluene–xylene) mixture for refinery or chemical-plant integration. |
C₆H₆ + C₇H₈ + C₈H₁₀ (mixed) |
Liquid |
1.25 TPD |
— |
| MIN-002 |
Pozzolanic SCM Powder NEW |
Pozzolanic SCM powder; direct OPC replacement with embedded carbon-credit value. |
SiO₂ + Al₂O₃ + CaO + Fe₂O₃ (SCM blend) |
Solid — fine powder |
5 TPD |
— |
| WTR-004 |
Softened Water |
Ion-exchange softened water; calcium and magnesium hardness ions removed below 1 mg/L. |
H₂O, Ca/Mg < 1 mg/L |
Liquid |
7.5 TPD |
— |
| WTR-005 |
Distilled Water |
Single-stage thermally distilled water; low TDS for industrial process use. |
H₂O, TDS < 10 ppm |
Liquid |
2.5 TPD |
— |
| WTR-006 |
Purified Water (USP) |
Multi-stage purified water meeting USP ‹ 1231 › specifications. |
H₂O (USP grade) |
Liquid |
2.5 TPD |
— |
| WTR-FC-001 |
FC Water — Industrial DI NEW |
PEM fuel-cell cathode condensate recovered and polished to industrial deionized quality. |
H₂O (from electrochemical H₂ + O₂ recombination) |
Liquid |
25 TPD |
— |
| CRB-006 |
Conductive Carbon CDR |
High-conductivity carbon black for battery electrodes and conductive composites. |
C > 99%, SA > 1000 m²/g |
Solid — fine powder |
3.75 TPD |
— |
| CRB-007 |
High-Grade Carbon Black CDR |
High-surface-area carbon black for advanced electrode and catalyst-support applications. |
C, SA > 1500 m²/g, particle < 50 nm |
Solid — ultra-fine powder |
3.75 TPD |
— |
| CRB-008 |
High-Purity Graphite CDR |
Nuclear and battery-grade high-purity graphite; < 0.1% total impurity. |
C > 99.9% |
Solid — block / powder |
3.05 TPD |
— |
| CRB-019 |
Hard Carbon (Na-ion) CDR NEW |
Turbostratically disordered hard carbon engineered for sodium-ion battery anode applications. |
C (turbostratic / disordered structure) |
Solid — powder |
1.5 TPD |
— |
| MTL-010 |
Chromium |
High-purity chromium recovered from stainless-steel and plating fractions. |
Cr > 99% |
Solid — granule / flake |
0.5 TPD |
— |
| MTL-012 |
Silver |
Fine silver recovered from electronics and photovoltaic cell fractions. |
Ag > 99.9% |
Solid — granule / bar |
0.00075 kg |
— |
| MTL-013 |
Gold |
Gold recovered from printed-circuit-board and connector fractions. |
Au > 99.9% |
Solid — granule / bar |
0.000075 g |
— |
| MTL-014 |
Platinum |
Platinum group metal recovered from catalytic converter fractions. |
Pt > 99.9% |
Solid — sponge / powder |
0.00001 g |
— |
| MTL-015 |
Palladium |
Palladium recovered from electronics and catalytic converter fractions. |
Pd > 99.9% |
Solid — sponge / powder |
0.0001 g |
— |
| MTL-033 |
Cobalt |
Cobalt recovered from battery black-mass and electronics; precursor for battery-grade compounds. |
Co > 99% |
Solid — powder / nodule |
0.05 TPD |
— |
| MTL-050 |
Iron Oxide Pigments NEW |
Iron oxide pigments synthesised from recovered iron fraction; construction, coating, and ceramics markets. |
Fe₂O₃ / Fe₃O₄ (pigment grade) |
Solid — powder |
0.5 TPD |
— |
| GLS-005 |
Recycled Container Glass |
Food-grade sorted cullet for direct remelting in container-glass furnaces. |
SiO₂ + Na₂O + CaO (food-safe) |
Solid — cullet |
1 TPD |
— |
| GLS-006 |
Glass Beads |
Spherical glass beads for road-marking retroreflectivity, shot-blast, and optical diffusion. |
SiO₂ + glass oxides (spherical) |
Solid — beads |
0.75 TPD |
— |
| GLS-007 |
Foam Glass |
Cellular foam glass for thermal insulation and lightweight construction applications. |
SiO₂-glass + pore structure |
Solid — foam block / granule |
0.6 TPD |
— |
| GLS-012 |
Foam Glass Cellular Block NEW |
Foamed and sintered cellular glass block for structural thermal insulation applications. |
SiO₂-glass (cellular, sintered) |
Solid — cellular block |
0.2 TPD |
— |
| GAS-006 |
High-Purity Nitrogen |
High-purity nitrogen (99.99%) for electronics processing, analytical, and critical inerting applications. |
N₂ > 99.99% |
Gas (compressed) |
6.25 TPD |
— |
| GAS-007 |
High-Purity Oxygen |
High-purity oxygen (99.5%) for medical, cutting, and specialty-process applications. |
O₂ > 99.5% |
Gas (compressed) |
5 TPD |
— |
| GAS-008 |
Argon |
Pure argon from air-separation tail stream; welding, sputtering, and plasma-process applications. |
Ar (monatomic noble gas, 99.99%) |
Gas (compressed) |
0.05 TPD |
— |
| GAS-016 |
Pure Carbon Monoxide NEW |
Pure carbon monoxide isolated via PSA bypass route for chemical synthesis feedstock. |
CO (industrial purity) |
Gas (compressed) |
0.5 TPD |
— |
| GAS-017 |
Beverage-Grade CO₂ NEW |
Food- and beverage-specification CO₂ produced from post-purification of captured industrial CO₂. |
CO₂ (food / beverage spec) |
Gas / liquid (compressed) |
1 TPD |
— |
| ARM-003 |
Benzene |
Pure benzene (>99.9%) for styrene, cumene, and cyclohexane downstream synthesis. |
C₆H₆ |
Liquid |
3.75 TPD |
— |
| ARM-004 |
Toluene |
Pure toluene (>99.9%) for solvent, DNT, and benzene-disproportionation applications. |
C₇H₈ |
Liquid |
3.75 TPD |
— |
| ARM-005 |
Mixed Xylenes |
Mixed xylene isomers (>99%) for p-xylene separation or mixed-feed oxidation. |
C₈H₁₀ (o/m/p isomers) |
Liquid |
2.75 TPD |
— |
| ARM-013 |
Aromatic Marine Fuel Blendstock NEW |
Unhydrotreated aromatic blendstock for marine bunker fuel or ground-transport diesel blend. |
C₆–C₁₄ aromatic hydrocarbons (blended) |
Liquid |
1 TPD |
— |
| MIN-003 |
Geopolymer Precursor NEW |
Alkali-activated geopolymer precursor for low-CO₂ binder systems and construction applications. |
SiO₂ + Al₂O₃ + alkali activator blend |
Solid — powder |
1.5 TPD |
— |
| MIN-004 |
Precipitated Calcium Carbonate CDR NEW |
Precipitated calcium carbonate sequestering ~0.44 t CO₂ per tonne product; filler and coatings market. |
CaCO₃ (precipitated, PCC-equivalent) |
Solid — fine powder |
0.5 TPD |
— |
| WTR-007 |
Deionized Water |
Deionized water with high resistivity for laboratory and semiconductor rinsing. |
H₂O, resistivity > 10 MΩ·cm |
Liquid |
3.75 TPD |
— |
| WTR-008 |
Semiconductor Grade Water |
Semiconductor process water; ultra-low particle count, meeting ASTM E1699 Type E1. |
H₂O, particles < 0.1 µm |
Liquid |
2.5 TPD |
— |
| WTR-FC-002 |
FC Water — Semiconductor NEW |
Further-polished FC-derived water meeting semiconductor-grade resistivity specification. |
H₂O, resistivity equiv. WTR-008 |
Liquid |
6 TPD |
— |
| CRB-009 |
Carbon Fiber Precursor CDR |
Ultra-pure carbon precursor for polyacrylonitrile-route carbon fibre manufacturing. |
C > 99.99%, SA > 2500 m²/g |
Solid — fibre precursor |
2.5 TPD |
— |
| CRB-010 |
Graphene Oxide CDR |
Graphene oxide sheets for composite reinforcement, filtration membranes, and energy storage. |
C + O (C/O ratio 2.1–2.9) |
Solid — powder / dispersion |
0.5 TPD |
— |
| CRB-011 |
Multi-Walled CNTs CDR |
Multi-walled carbon nanotubes for structural composites and electrode additive applications. |
C (tubular, 10–50 nm diameter) |
Solid — fibrous powder |
0.3 TPD |
— |
| CRB-012 |
Synthetic Graphite CDR |
Synthetic graphite for EV battery anodes and high-performance electrode applications. |
C > 99.99%, ash < 0.1% |
Solid — powder |
2.05 TPD |
— |
| CRB-018 |
Spheroidized Graphite CDR NEW |
Mechanically spheroidised battery-grade graphite optimised for EV anode packing density and cycle life. |
C > 99.9% (spheroidal morphology) |
Solid — spherical powder |
1.5 TPD |
— |
| CRB-020 |
Nanoporous Activated Carbon CDR NEW |
KOH-activated nanoporous carbon for CO₂ capture, supercapacitor electrodes, and gas storage. |
C (ultra-microporous network) |
Solid — powder |
1 TPD |
— |
| CRB-021 |
Mesoporous Templated Carbon CDR NEW |
Hard-template mesoporous carbon for catalyst support and electrochemical device applications. |
C (mesoporous, templated structure) |
Solid — powder |
0.8 TPD |
— |
| MTL-016 |
Cerium (REE) |
Separated cerium oxide / metal from mixed REE concentrate; catalyst and polishing feedstock. |
Ce > 99.9% (as oxide or metal) |
Solid — powder |
0.0002 kg |
— |
| MTL-017 |
Lanthanum (REE) |
Separated lanthanum from mixed REE concentrate; battery electrode and catalyst use. |
La > 99.9% |
Solid — powder |
0.0002 kg |
— |
| MTL-018 |
Neodymium (REE) |
Separated neodymium for high-performance permanent magnet manufacture (NdFeB). |
Nd > 99.9%, magnet grade |
Solid — powder |
0.00025 kg |
— |
| MTL-019 |
Yttrium (REE) |
High-purity yttrium for phosphor, LED, and YAG laser applications. |
Y > 99.95% |
Solid — powder |
0.00015 kg |
— |
| MTL-020 |
Praseodymium (REE) |
High-purity praseodymium for magnet alloys and catalysts. |
Pr > 99.95% |
Solid — powder |
0.0001 kg |
— |
| MTL-021 |
Gadolinium (REE) |
High-purity gadolinium for MRI contrast agents and neutron shielding. |
Gd > 99.95% |
Solid — powder |
0.0001 kg |
— |
| MTL-028 |
Mercury |
Purified mercury recovered from fluorescent lamp and thermometer fractions. |
Hg > 99.99% |
Liquid — elemental mercury |
0.0005 kg |
— |
| MTL-029 |
Cadmium |
Purified cadmium recovered from NiCd battery and legacy-ash fractions. |
Cd > 99.99% |
Solid — rod / granule |
0.001 kg |
— |
| MTL-030 |
Arsenic |
High-purity arsenic from pressure-treated wood and legacy-ash fractions; semiconductor-grade dopant. |
As > 99.99% |
Solid — ingot |
0.0005 kg |
— |
| MTL-031 |
Antimony |
Purified antimony from flame-retardant legacy-ash fraction; fire-retardant and semiconductor use. |
Sb > 99.9% |
Solid — ingot / granule |
0.0005 kg |
— |
| MTL-032 |
Boron |
High-purity boron from legacy-ash; semiconductor, ceramics, and neutron-absorber feedstock. |
B > 99.9% |
Solid — powder / granule |
0.001 kg |
— |
| MTL-044 |
Lithium Carbonate NEW |
Battery-grade lithium carbonate recovered from black-mass leachate. |
Li₂CO₃ (battery-grade) |
Solid — powder |
0.025 TPD |
— |
| MTL-046 |
Cobalt Sulfate NEW |
Battery-grade cobalt sulfate from cobalt refining cascade. |
CoSO₄ (battery-grade) |
Solid — crystalline powder |
0.025 TPD |
— |
| MTL-047 |
Nickel Sulfate NEW |
Battery-grade nickel sulfate from nickel refining cascade. |
NiSO₄ (battery-grade) |
Solid — crystalline powder |
0.015 TPD |
— |
| MTL-048 |
Lithium Hydroxide NEW |
Battery-grade lithium hydroxide monohydrate; preferred precursor for high-Ni NMC cathode synthesis. |
LiOH·H₂O (battery-grade) |
Solid — powder |
0.015 TPD |
— |
| MTL-051 |
Lead, Battery-Grade NEW |
High-purity lead from lead-acid battery recovery cascade; battery-plate and shielding grade. |
Pb (high purity) |
Solid — ingot / granule |
0.075 TPD |
— |
| GLS-008 |
High-Quality Cullet |
High-quality glass cullet with very low metal-oxide and bubble count for specialty glass production. |
SiO₂ + Na₂O + CaO, metal oxides < 10 ppm |
Solid — cullet |
0.4 TPD |
— |
| GLS-009 |
Specialty Glass Powder |
Specialty glass powder micronised to D50 < 5 µm for solder glass, dielectric frit, and coatings. |
SiO₂ > 99.99%, D50 < 5 µm |
Solid — ultra-fine powder |
0.3 TPD |
— |
| GLS-011 |
Photocatalytic Silica-TiO₂ NEW |
TiO₂-doped calcined photocatalyst from glass powder; air purification and photocatalytic applications. |
SiO₂ + TiO₂ (photocatalytic composite) |
Solid — powder |
0.1 TPD |
— |
| GAS-010 |
Specialty Gas Mixtures |
Custom-blended calibration and process gas mixtures for industrial and analytical use. |
N₂ + O₂ + Ar + CO₂ + trace (blended to order) |
Gas (compressed blends) |
0.5 TPD |
— |
| GAS-011 |
Neon |
High-purity neon for lighting, excimer-laser, and semiconductor-lithography applications. |
Ne > 99.999% |
Gas (compressed) |
0.001 kg |
— |
| ARM-006 |
para-Xylene |
Para-xylene (>99.95%) for terephthalic acid and PET polymer production. |
C₈H₁₀ (para-isomer, >99.95%) |
Liquid |
2 TPD |
— |
| ARM-007 |
Styrene |
Pure styrene (>99.9%) for polystyrene, ABS, and SBR rubber production. |
C₈H₈ |
Liquid |
1.5 TPD |
— |
| ARM-008 |
Phenol |
Pure phenol (>99.9%) for bisphenol-A, phenolic resins, and caprolactam. |
C₆H₅OH |
Liquid (mp 40.5 °C) |
1.25 TPD |
— |
| ARM-009 |
Naphthalene |
Pure naphthalene (>99.9%) for phthalic anhydride and specialty chemical production. |
C₁₀H₈ |
Solid (mp 80 °C) |
1 TPD |
— |
| ARM-014 |
Recovered Polystyrene Monomer NEW |
Recovered styrene monomer via selective depolymerisation of polystyrene fraction. |
C₈H₈ (recovered monomer) |
Liquid |
0.4 TPD |
— |
| MIN-005 |
Specialty Mineral Filler NEW |
Calcined and classified ceramic filler for coatings, polymer compounds, and refractory applications. |
SiO₂·Al₂O₃ (calcined ceramic blend) |
Solid — powder |
0.3 TPD |
— |
| WTR-009 |
Pharmaceutical Grade Water |
USP/EP pharmaceutical-grade purified water; endotoxin-controlled for injectable preparations. |
H₂O, endotoxins < 0.001 EU/mL |
Liquid |
1.25 TPD |
— |
| WTR-010 |
Ultra-Pure Water |
Ultra-pure water at 18.2 MΩ·cm resistivity; silica and TOC at sub-ppb levels. |
H₂O, silica < 0.1 ppb |
Liquid |
1.25 TPD |
— |
| WTR-FC-003 |
FC Water — Ultra-Pure NEW |
FC-source water polished to endotoxin-free pharmaceutical / ultra-pure standard. |
H₂O, equiv. WTR-009/010 spec |
Liquid |
3 TPD |
— |
| CRB-013 |
Reduced Graphene Oxide CDR |
Reduced graphene oxide with high C/O ratio for electronics and transparent-conductor applications. |
C (C/O > 20) |
Solid — thin film / powder |
0.05 TPD |
— |
| CRB-014 |
Multi-Layer Graphene CDR |
2–5 layer graphene for flexible electronics, energy storage, and advanced composites. |
C (2–5 graphene layers) |
Solid — flake |
0.005 TPD |
— |
| CRB-015 |
Single-Layer Graphene CDR R |
Pristine monolayer graphene for high-end electronics, sensors, and research applications. |
C (monolayer, >95%) |
Solid — film / flake |
0.001 TPD |
— |
| CRB-016 |
Single-Walled CNTs CDR R |
High-purity single-walled carbon nanotubes for quantum electronics and ultra-strength composites. |
C (SWCNT, 99% single-wall) |
Solid — fibrous powder |
0.002 TPD |
— |
| CRB-017 |
Fullerenes (C60/C70) CDR R |
Separated C₆₀ / C₇₀ fullerene isomers for pharmaceutical, photovoltaic, and research use. |
C₆₀ / C₇₀ (99.9% pure) |
Solid — crystalline powder |
0.0005 TPD |
— |
| MTL-040 |
Tungsten, Ultra-Pure R |
Ultra-pure tungsten from incandescent lamp filaments and cutting-tool fractions. |
W > 99.9999% |
Solid — powder / wire |
0.000005 g |
— |
| MTL-041 |
Bismuth, Ultra-Pure R |
Ultra-pure bismuth from pharmaceutical and cosmetic fractions. |
Bi > 99.9999% |
Solid — ingot |
0.00005 g |
— |
| MTL-042 |
Gallium, Semiconductor R |
7N gallium from LED and LCD fractions; semiconductor epitaxy feedstock. |
Ga > 99.99999% |
Solid / Liquid (mp 29.8 °C) |
0.00005 g |
— |
| MTL-043 |
Indium, Semiconductor R |
7N indium from ITO-coated display glass; transparent-conductor and semiconductor use. |
In > 99.99999% |
Solid — ingot / rod |
0.0001 g |
— |
| GLS-010 |
Ultra-Pure Silica |
Electronic-grade ultra-pure fused silica for semiconductor optics, fibre preform, and precision substrates. |
SiO₂ > 99.9999%, OH < 1 ppm |
Solid — ingot / powder |
0.1 TPD |
— |
| GAS-013 |
Ultra-High Purity Nitrogen |
Ultra-high-purity nitrogen (99.9999%) for semiconductor fab lines and critical analytical processes. |
N₂ > 99.9999% |
Gas (compressed) |
0.05 TPD |
— |
| GAS-014 |
Xenon R |
High-purity xenon for medical imaging, satellite ion propulsion, and specialty lighting. |
Xe > 99.999% |
Gas (compressed) |
0.000008 g |
— |
| GAS-015 |
Krypton R |
High-purity krypton for specialty lighting, insulated glazing (double-pane), and nuclear research. |
Kr > 99.999% |
Gas (compressed) |
0.00004 g |
— |
| ARM-010 |
Anthracene |
Ultra-pure anthracene for OLED emitters, fluorescent dyes, and organic semiconductor applications. |
C₁₄H₁₀ > 99.99% |
Solid (mp 216 °C) — crystalline |
0.05 TPD |
— |
| ARM-011 |
Pyrene R |
Ultra-pure pyrene for organic electronics, fluorescent probes, and PAH research standards. |
C₁₆H₁₀ > 99.99% |
Solid (mp 150 °C) — crystalline |
0.005 TPD |
— |
| MIN-006 |
Low-Activation Aggregate NEW |
Trace-element-stripped mineral aggregate for nuclear and medical radiation-shielding applications. |
Mixed oxides (Ca / Si / Al / Fe, trace-stripped) |
Solid — aggregate / block |
0.05 TPD |
— |